I need a solution
Hi,
I need to set up an email alert for any meida(s) are frozen. please provide me the script and configuration steps. need a suggestion the frequency of the script's per day.
Thanks
↧
EMail alert if a media is frozen
↧
netbackup 7.6 vm conversion task failed with status 7
I need a solution
when we try to restore BMR backup to VM using VM converstion task failed with status 7
master server win 2008 r2 netbackup 7.6
client win 2003
vmware esxi server 5.1
↧
↧
restore jobs fails
I need a solution
Hi all,
we are running BE 2010 and since a view days, sometimes i recive restore errors with catalogs issues.
So I would like to repair the catalogs, is ther a possibility to do that?
or i have to rebuild the catalogs? delete all catalogs and recatallog all tapes.
Thanks all
↧
Image import problems
I need a solution
I have a backup image spanning on 2 different tapes belonging to another netbackup domain. When I run Tape contents report for each tape, I can see the backup id (backup image) that I want to import. However, if I run Phase 1 import, only one tape is showing the required backup id. The other tape doesn't show it.
Any idea why is it happening?
I ran Phase 1 import for both the tapes. But only one tape shows the required backup id. I know that backup image spans on both the tapes. After running phase 1 import, I tried to run phase 2 import for the tape on which I can see the required backup ID , but it fails with "unexpected EOF and the image information is not complete)
↧
Correct Way Of Backing Up Hyper-V Hosts
I need a solution
Hi All,
I'm still trying to fine tune my backups to give the best bang for the buck time and effort wise.
At present I am backing up all my Hyper-V vm's without GRT, and separately backing up my Exchange 2003 information store (VM).
I was under the impression that if you backed up a VM using GRT then you could restore items like Exchange or AD, however I am unable to get this to work.
When I attempt to use GRT for my VM's the backup fails with the log message: "an invalid parameter was specified".
Should I be able to do it this way,or am I missing the point here?
Any help greatly appreciated.
Regards,
↧
↧
Restoring BE 2012 backup on a replacement server 2008r2?
I need a solution
Hi there. I have BE 2012 with licences for connecting computers. The server which ran BE 12 has failed. All backups were to disk which means that although the server which managed the backups has failed, the backups themselves are located on another system and have not been compromised.
I have re-installed Server 2008 R2 and Be 2012, how can I restore files from my backups? I am not too fussed about system state, but would like to get the files back for users.
When I open BE 2012 now, it does not know about the backup jobs located on the other server, how can I get it to realise them such that I can restore them? I have stuggled to find a guide which explains this unique situation.
↧
How to make a backup from data ona QNAP NAS
I need a solution
We have BE2010R3 running on a Windows Server 2008R2. In the network we have a QNAP NAS model 859. From the server you can access the data on the NAS. When you want to make a backup with BE from the data on the NAS you can select the NAS and see the directories on it. The NAS reports a seccessful login from the server. But in BE the directories shop up as greyed and you can not select them to show the files. So you cannot make a selection for the backup to be made. How can we make a backup of the data on the NAS to tape using BE?
↧
Netbackup commands
I need a solution
Can someone help providing Netbackup command which gives the following details?
1. How much data is being protected?
2. How much data is being protected by retention period of time?
Regards,
↧
Need the command line guide of SSR 2013
I need a solution
I need a command line document of SSR 2013 .
0
↧
↧
Client-side deduplication not working
I need a solution
Hi,
We are running Backup Exec 2012 on a Windows Server 2008 R2 machine with deduplocation storage connected. When a backup is run with the client-side deduplication selected the job completes with the following execptions:
Client-side deduplication is enabled for this job, but it could not be used.
I have read the following 2 articles and made sure the suggestions, where possible, are implemented:
http://www.symantec.com/business/support/index?pag...
http://www.symantec.com/business/support/index?pag...
I cannot follow the [ II ] Configure the Remote Agent with Deduplication on the agent that is being backed up. steps as I can't see the options it is telling me to follow so assume these are for 2010 or earlier?
I have implemented the firewall (local windows) rules and looked through the firewall logs from during the backup process and can't see anything being blocked.
When I change the option to server-side dedup it works fine but I don't want to use server-side.
Any suggestions or thoughts on what I may have missed would be greatly appreciated as I am not a Backup Exec expert and am a bit stuck! If I'm missing out any information just say.
Thanks
↧
diffrence between symantec backup exec et symantec netbackup
I need a solution
hi all of you
some can help me to identify the diffrence between symantec backup exec et symantec netbackup
Thanks
↧
NetBackup 7.6.0.1 & EMC VNX Snapshots
I need a solution
Hi,
We've tried on a number of occasions to get NetBackup to perform VNX Snapshot (not SnapView) backups however whenever we try we get error 156 errors and get absolutely no where.
Has anyone any experience in using NetBackup and EMC VNX Snapshot backups and if so, how did you get it working?
I look forward to any help anyone can give
Thank you
↧
Sectors / Source
I need a solution
I read the KB artickle on 4K drives. I'm using a 4K drive as my DESTINATION, but I'm trying to use the drive (pic attached) as a source. I'm guessing I can't? (since the 4K destination drive doesn't show up in any of the console lists, it list's this drive (pic) as the destination)
I'm guessing this is a 512E, yes? NOT supported as a source, right?
Thank you
↧
↧
Symantec backup EXEC 2012 all in one (virtuel and physique)
I need a solution
hi all of you
some one can explain me the :Licensed by Agent/Option and by Capacity using in Symantec backup EXEC 2012 all in one
Thnaks
↧
v-ray technologie
I need a solution
hi
I'm debutante in the backup can you expllain me the:
“Single-Pass” Backup
“Single-Step” Recovery
so thanks
nice day
↧
SAP HANA Full & Log Backups
I need a solution
Hi,
yesterday we configured the backup for our first SAP HANA applicance.
This was ok so far, we managed to do full and log backups.
The problem is:
How do I do full backups to tape, but log backups to disk?
There is the file initSAP.utl, but in there, I can only specify 1 policy and/or 1 schedule, so full and log backups go to the same schedule.
How do I send logs to a different Policy/ schedule than ful backups?
Thanks!
Volker
↧
Minimum Backup Rights or Alternative Solution
I need a solution
Hi All,
We are currently running Backup Exec 2010 R3 and we are looking for a work around for the rights needed to perform backups. We have a maintanence account set up to perfrom all of our backups that's currently in the Domains Admin group. I understand that Symantec needs the backup account to have Domain Admin rights, but we have been forced to remove the account out of that group due to policy changes. Do we have any options other than adding the account to the local administrators group on each server to perform the backups? Symantec's solution seems to only be adding the account responsible for backups to the Domain Admins account. Any suggestions would be greatly appreciated.
↧
↧
Backup often fails with error "V-79-57344-34108 - An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly resynchronized with the original volumes"
I need a solution
Hello!
We're often experiencing failed backups, they fail with an error "V-79-57344-34108 - An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly resynchronized with the original volumes".
These failures don't have any particular pattern, one can fail, the next it's backed up or two can fail and then the job is successful. One thing for sure: after server restart the next backup always succeeds, but restarting the server is not an option.
vssadmin list writers output says the writers state is stable with no errors.
Can someone advise on this?
Thanks in advance!
↧
NBU v7.6.0.2
I do not need a solution (just sharing information)
When will be the official release of NBU v 7.6.0.2 out to resellers and Symantec Partners?
↧
Symantec Backup Exec 3600 Appliance
proxy issue
Hi,
After configuring the Backup Exec 3600 Appliance we are getting email for every 10 mins stating proxy error not able to communicate to server to upload call home data.
CALLHOME status: Not able to upload callhome data
Error: 500 SSL read timeout:
Please contact Symantec Support to resolve this issue.
CallHome Proxy Show
Proxy Settings
Server : https://Ipaddress
Port : 8080
This issue resolved after adding "s" to http, since the data is sent through secured http.
Thanks,
↧