I need a solution
Someone installed BackupExec 2012 Agent for redhat 7.1? I have not found documentation on this subject.
Thank You!!!
↧
Install Agente RHEL 7.1
↧
System Recovery 2013 11.0.1.47662 Recovery_Disk Dont Support USB 3.0
I need a solution
Im trying to boot my SRD 2013 11.0.1 on a new HP Proliat DL160 Gen9 and dont recognize the Keyboard or Mouse. I cant do anything because of that. i Disable the USB 3.0 feature on the the server and stay the same issue.
↧
↧
windows failed to start
I need a solution
I used backup exec system recovery to convert virtual to physical ,
in the virtual server used BESR 2010 install agent and run backup all system and used SRD (symantec recovery disk) in the physical server and then after recovery the physical server is reboot after that the physical server cannot start up ,have the error "Windows failed to Start ......"
Please help me !!
damrongpol s.
↧
backup exec 15
I need a solution
Hi ,
I recently upgraded my Backup Exec 2014 t0 Backup Exec 15 and now my expired backup sets are not longer deleted automatically.
Anyone here that can help me with my problem?
LEVD
↧
Symantec Backup Exec 15 & Oracle 11G on the same server
I need a solution
Hi.
I plan to get one (1) server with 30+ drives to run my Oracle Database & Backup Exec 15 applications.
For sure this is not the best practice but I force to deploy this set-up as of the moment.
Questions:
1. Can I install Symantec BE 15 & Oracle 11G R2 on the same server? And do backups on my Oracle Database?
2. Will I be able to do backups on my Oracle Database to my Tape Library which directly attached to the sever via SAS?
3. As I understand I will just need the following licenses:
- 1x Agent for application & database
- 1x Symantec Backup Exec 15
4. Are there other things I should consider?
Thanks,
Paul
↧
↧
Some problem with Optimized Duplication
I need a solution
Hello all,
I have some problem with duplication from a DataDomain to another DataDomain. The duplication sometimes work fine and sometimes no, but in both case I have a weird message in the Job Details:
07/23/2015 10:44:32 - Info bpduplicate (pid=14220) Suspend window close behavior is not supported for optimized duplications
07/23/2015 10:44:32 - Info bpduplicate (pid=14220) window close behavior: Continue processing the current image
I attacched one job ended fine and one bed. I also tried a manual duplication and in this case the message not compare and work all fine.
Please I ask you, which logs I can look as help ?
below some information:
Master server: OS Linux Red Hat Enterprise Linux Server release 5.8 (Tikanga); NBU 7.6.0.3; Plugin DDboost Vendor Version: 3.0.1.0-451885;
Media Server: OS Win Server 2008 R2 Standard; NBU 7.6.0.3; Plugin DDboost Vendor Version: 2.6.1.0 (I will update with last version but I don't think that it is the cause of issue).
Tx !!!
↧
V-79-57344-34036 - An unknown error has occurred.
I need a solution
HI,
I'm trying to find what could be triggering the above error in Backup Exec 2010.
It happens when we backup a local server and to a USB removal Hard drive.
Backup2Disk has been set to split the backup files in to 50GB due to performance issue, error seems to happan after the first 50-70GB error seems to happen arround these sizes of the backup.
Thanks
Dan.
↧
Netbackup SQL servers - QOS?
I need a solution
We currently are backing up our sql servers using Netbackup, however netbackup is utilizing a ton of bandwidth to perform the backups. We have a project in place to rectify this at the server level, however in the interim, is there any way to limit the amount of bandwidth utilized by Netbackup when connecting to SQL Server?
I've read some tech notes on using a LIMIT_BANDWIDTH setting, however it stated it wouldn't apply for SQL backups. Is there any setting, whether in the backup batch file, client, etc. which would throttle the bandwidth utilized during backups of SQL server?
Thanks
↧
Backup Exec 2012 Backups stuck on running randomly
I need a solution
Hi,
We have a Server 2008 R2 server that is used for backups. We use Backup Exec 2012 and backup various servers. It is patched to the latest version.
Now and again some jobs will be stuck on running at 0MB byte rate. The way I get around this is to reboot the server and the jobs then run ok.
Does anybody have any ideas to resolve the problem?
↧
↧
Set Chrome as default browser for links in job logs
I need a solution
I've noticed an odd behavior in Backup Exec that's been around for quite awhile. I seem to remeber this as an issue with BE2010 and 2012.
I have Chrome installed on my Backup Exec server, and it's set as the default browser... however, when I click on a link to a tech note link inside the job log it opens up in Internet Explorer.
This is really more of an annoyance rather than a real issue, but I'd like to find a way to fix it.
Thanks
↧
SAP restores from 7.5.0.6 Client to 7.5.0.4 Client - any issues
I need a solution
I've been asked to restore an SAP DB (server has version 7.5.0.6) to a client which has a version level of 7.5.0.4.
Any issues or bugs that I should be aware of?
↧
OpsCenter cache/heap sizes set for the recommended RAM size
Think would be a good idea to have the cache/heap sizes in OpsCenter set for the recommended RAM size on installation.
Or even better for the actual amount of RAM at installation.
Think it would give a better performance and thereby experience of OpsCenter.
↧
OpsCenter db number of CPUs set at installation
Think it would be a good idea, if the number of CPUs used by the OpsCenter db was set to the number CPUs in the server at installation.
Think it would give a better performance and thereby experience of OpsCenter
↧
↧
BackupExec intermittently fails to set or clear backup mode of EV indices
I need a solution
Backup of EV 10.0.4 (using BackupExec 2012 SP4) fails intermittently while attempting to set or clear backup mode on EV indices. Event ID 41397 ("Some index volumes may not have the correct backup mode set. This can result in inconsistent backups.") is logged on EV server & backup mode can thereafter be set / cleared manually on EV server with no errors. Setting or clearing Backup Mode is always succesful on EV server using both admin console & powershell. But the problem keeps reappearing randomly when the BackupExec job is executing. BackupExec jobs do not fail consistently but 50-60% of the time, always with the same error ("cannot set or clear backup mode"). Workaround described in TECH209776 has already been attempted with no result.
Any ideas? Thank you very much in advance
↧
BE 2015 Testzeitraum abgelaufen, Test jedoch nicht vollendet :(
I need a solution
Hallo, aufgrund Performanceproblemen konnte die BE nicht innerhalb 60 Tagen zufriedenstellend getestet werden.
Gibt es die Möglichkeit , den Testzeitraum nochmal zu verlängern ?
Kunde kauft nicht, wenn die Sicherung nicht stabil über 2 Wochen läuft :(
Danke schon mal für Hinweise.
Hi There is there a Chance to add some Time to the Evaluation time ( 60 Days)
my Test is hang on performance Problems so the Customer is not Sure to buy this Product.
Thanks in Advantage for some hints
Markus
↧
Treffen der NetBackup Usergruppe am 21. & 22. Oktober in Nürnberg
Location:
qSkills, Süd-West-Park 65, 90449 Nürnberg
Time:
Wed, 21 October, 2015 - 10:00 CEST - Thu, 22 October, 2015 - 16:00 CESTDas nächste Treffen der NetBackup Usergruppe findet bei der qSkills in Nürnberg (www.qskills.de) am Mittwoch, den 21. + Donnerstag, den 22. Oktober 2015 statt.
Die Adresse lautet: Süd-West-Park 65, 90449 Nürnberg
Alle Infos zur Anreise findet Ihr unter: https://www.qskills.de/documents/pdf/Anreise_Nuernberg_Oeffentliche_deu.pdf
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Die Agenda für das Treffen ist erst vorläufig fertig - nach wie vor sind wir von euren Beiträgen & Anregungen abhängig … also bitte melden und Vorschläge machen, mit einem kleinen Vortrag beteiligen, etc.
(Vorläufige) Agenda:
Uhrzeit | Mittwoch, der 21. Oktober 2015 | ||
bis | 10:00 | Anmeldung | |
10:00 | 10:30 | Begrüßung durch qSkills | |
10:30 | 10:45 | Agenda, Organisation Abendveranstaltung / Transfer | |
10:45 | 12:30 | Vorstellungsrunde | |
12:30 | 14:00 | Mittagspause | |
14:00 | 14:30 | Vorstellung neuer Ablauf für Feature-Requests (GUI & Features) | |
14:30 | 15:00 | NetBackup v7.7, Erfahrungen & Feedback | |
15:00 | 15:30 | Information Map - was sichere ich da eigentlich jeden Tag? | |
15:30 | 16:00 | ~ Monitoring von Deduplication Jobs & Replizierungen ~ | |
16:00 | 16:30 | Pause | |
16:30 | 17:00 | Feature Requests & Feedback für Engineering (Aufnahme) | |
Donnerstag, der 22. Oktober 2015 | |||
09:15 | 09:30 | Organisation - kommendes Treffen im Frühjahr in Norddeutschland | |
09:30 | 10:00 | Vorstellung NetBackup v7.8, NBU 5240 Appliance & Roadmap | |
10:00 | 10:30 | ~ SharePoint Sicherungen & Restore: Best Practices / Erfahrungen ~ | |
10:30 | 11:00 | Pause | |
11:00 | 11:45 | Tapes & Bandwechsel: Workgroups zu Organisation, Richtlinien, Vorgaben, Prozessen | |
11:45 | 12:00 | Präsentation der Workgroup-Ergebnisse | |
12:00 | 12:30 | NBU Copilot: Backup & Recovery for BIG Databases | |
12:30 | 14:00 | Mittagspause | |
14:00 | 15:00 | " ??? " | |
15:00 | 15:45 | Feature Requests & Feedback für Engineering (Finalisierung) | |
15:45 | 16:00 | Fragen & Verabschiedung |
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Anmeldung - WICHTIG:
Bitte meldet Euch per eMail bei mir (achim.kapitz@dignum.de) zu dem Treffen in Nürnberg an!
Veritas und die qSkills werden das Treffen und die Abendveranstaltung sponsern, somit wird beides für euch wieder kostenfrei sein.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hotel:
Kurt hat über sein Firmenkontingent im „Maritim Hotel“ (http://www.maritim.de/de/hotels/deutschland/hotel-nuernberg/uebersicht) direkt am Hauptbahnhof - also optimal für den Abend - unter dem Stichwort „Veritas“ Zimmer für uns reserviert.
Der Preis beträgt 89,- € / Übernachtung inklusive Frühstück.
Bitte bucht diese rechtzeitig (das Kontingent besteht bis zum 22.09.2015) direkt im Hotel unter: Tel: 0911-2363-0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Wer bereits am Abend vorher (Di. Abend) anreist und Lust hat:
wir treffen uns um 20:00 Uhr vor dem Hotel und schauen mal, wo wir etwas Gutes zu Essen finden - die Altstadt ist ja nicht weit :-)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
↧
Netbackup client for RHEL on IBM Power PC.
I need a solution
Hi All,
Customer has a critical application configured on IBM P Series Platform. Support matrix does not support this platform i.e. Linux on IBM Power PC.
None of the NetBackup version even to the latest one are getting installed giving error incorrect platform.
uname -a
Linux Hostname 3.10.0-229.ael7b.ppc64le #1 SMP Fri Jan 30 12:03:50 EST 2015 ppc64le ppc64le ppc64le GNU/Linux
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.1 (Maipo)
Not sure why IBM and Symantec have not worked together to support P series Platform.
Is there any roadmap or future for this support.
Is there any workaround to install the client on this platform.
Found few technotes but not sure it will help.
https://support.symantec.com/en_US/article.TECH184...
https://support.symantec.com/en_US/article.TECH176...
Support matrix.
http://origin-symwisedownload.symantec.com/resourc...
TIA.
↧
↧
SDR-Backup from a copy of a backup set
I need a solution
Hi everybody,
I've just a problem restoring a Windows 2008 SBS with BE2012.This server is on another location.
I made a complete backup to an network drive. I copied all backup sets from this fullbackup with duplication function in BE to a USB-drive.
In my office I want to recover this server without installing Windows and BE.
I'm using SDR, locally connected storage, giving the programm the correct .DR File, choosing the last backup and the correct folder with the copy of this backup set.
Error message is:
The media for some of the backup sets could not be found in the selected storage device. Add another disk storage device containing the media required to restore the backup sets.
Is anybody able to tell me, how to work with copy of backup sets, if the Mediaserver isn't available or how to copy backups right, to test complete backups using SDR.
↧
Run netbackup command from appliance
I need a solution
Hi all,
I want to know if it possible to run netbackup command from 5220 in master/media mode ?
When I'm trying via SSH, support, maintenance elevate, i've got this advertise :
"Permission Denied. Access to root account requires overriding the Symantec Intrusion Security Policy.
Please refer to the appliance security guide for overriding instructions."
So i've read the securiry guide but, there is another option to bypass automatically the Symantec Intrusion Security Policy ? If not, i will reconsider to deploy my 5220 as master/media...
Thanks !
↧
Authoritative source of latest release
I need a solution
So, is 2.6.1.2 the latest NetBackup Appliance release?
I got that here: https://www-secure.symantec.com/connect/forums/netbackup-appliances-2612-now-available
Is there a more authoritative source?
↧