Dear All,
I've facing a problem with the title above.
I remove a tape media 1151L3 and add a new tape media 1160L3 on that slot.
Then I perform inventory robot with options 'Empty media access port prior to update'.
New tape 1160L3 attached to TLD replacing 1151L3.
old media 1151L3 goes to standalone
New media assign to previous volume pool OracleDBPool.
When run the job it successfully backup at tapemedia 1160L3.
But There is a additional job run which shows "A pending request has been generated for this resource request.
Operator action may be required" at active monitor which as follows
******************************************************
3/3/2015 12:57:36 PM - begin Media Contents
3/3/2015 12:57:37 PM - started process bptm (6724)
3/3/2015 12:57:37 PM - started process bptm (6724)
3/3/2015 12:57:37 PM - mounting 1151L3
3/3/2015 12:57:37 PM - requesting resource 1151L3
3/3/2015 12:57:37 PM - granted resource 1151L3
3/3/2015 12:57:37 PM - granted resource HP.ULTRIUM3-SCSI.003
3/3/2015 12:57:40 PM - Error bptm(pid=6724) error requesting media, TpErrno = Robot operation failed
3/3/2015 12:57:40 PM - current media 1151L3 complete, requesting next resource HP.ULTRIUM3-SCSI.003:OracleDBPool:1151L3
3/3/2015 12:57:45 PM - awaiting resource HP.ULTRIUM3-SCSI.003:OracleDBPool:1151L3 A pending request has been generated for this resource request.
Operator action may be required. Pending Action: Misplaced tape.,
Media ID: 1151L3, Barcode: LT1151L3, Density: hcart3, Access Mode: Read,
Action Drive Name: N/A, Action Media Server: N/A, Robot Number: 0, Robot Type: TLD,
Volume Group: 000_00000_TLD, Action Acs: N/A, Action Lsm: N/A
3/4/2015 4:42:01 PM - Error bptm(pid=6724) NBJM returned an extended error status: LTID reset media server resources (909)
3/4/2015 4:42:01 PM - Error nbjm(pid=1908) NBU status: 909, EMM status: LTID reset media server resources
**********************************************
I can't not suspend or cancel thatjob
Can anybody help me