Hello community,
We are having an issue with doing restores at the moment, an example log can be shown below.
11/25/2014 15:17:20 - begin Restore
11/25/2014 15:17:21 - number of images required: 1
11/25/2014 15:17:22 - media needed: MF071A
11/25/2014 15:17:22 - media needed: MF036A
11/25/2014 15:17:26 - restoring from image gandalf-backup_1194765667
11/25/2014 15:17:26 - Info bpbrm (pid=7049) backup is the host to restore to
11/25/2014 15:17:27 - Info bpbrm (pid=7049) telling media manager to start restore on client
11/25/2014 15:17:27 - Info bpbrm (pid=7049) spawning a brm child process
11/25/2014 15:17:27 - Info bpbrm (pid=7049) child pid: 7057
11/25/2014 15:17:27 - connecting
11/25/2014 15:17:27 - Info bpbrm (pid=7057) start tar on client
11/25/2014 15:17:27 - Info tar (pid=7063) Restore started.
11/25/2014 15:17:27 - connected; connect time: 0:00:00
11/25/2014 15:17:27 - requesting resource MF071A
11/25/2014 15:17:27 - Error nbjm (pid=4965) NBU status: 830, EMM status: No drives are available
11/25/2014 15:17:27 - Error nbjm (pid=4965) NBU status: 830, EMM status: No drives are available
11/25/2014 15:17:28 - Error bptm (pid=7052) NBJM returned an extended error status: No drives are available (2001)
11/25/2014 15:17:33 - Info bpbrm (pid=7049) got ERROR 252 from media manager
11/25/2014 15:17:33 - Info bpbrm (pid=7049) terminating bpbrm child 7057 jobid=387452
11/25/2014 15:17:33 - restored from image gandalf-backup_1194765667; restore time: 0:00:07
11/25/2014 15:17:33 - Warning bprd (pid=7030) Restore must be resumed prior to first image expiration on INFINITY
11/25/2014 15:17:33 - end Restore; elapsed time 0:00:13
Failed to get status code information (2826)
Aditional info:
Issue started after we relocated server room, everything was unplugged/powered down then setup the same.
Media ID: MF071A, Barcode: MF071A, Density: hcart, Access Mode: Read,
/usr/openv/volmgr/bin/tpconfig -d
Id DriveName Type Residence
Drive Path Status
****************************************************************************
0 TD01 hcart TLD(0) DRIVE=1
/dev/nst0 UP
1 TD02 hcart TLD(0) DRIVE=2
/dev/nst1 UP
Currently defined robotics are:
TLD(0) robotic path = /dev/sg2
EMM Server = backup
NetBackup is running on a linux server and I'm running the Admin console from my Windows 7 Pro PC.
And if it makes any difference, it throws up the errors before tapes are even inserted into the drives, and again once inserted and imported.
Any help would be much appreciated.
Thanks!