Hello,
I want to UP the drives listed below. I have checked the library and it does not have any errors. NetBackup seams to be working fine. I found this because I was looking at the settings for the SUN SL150 tape library. We are getting ready to add a SL500 tape library and I wanted to compare.
< tpconfig -d
Id DriveName Type Residence
Drive Path Status
****************************************************************************
0 HP.ULTRIUM5-SCSI.008 hcart3 TLD(1) DRIVE=5
/dev/rmt/4cbn UP
1 HP.ULTRIUM5-SCSI.009 hcart3 TLD(1) DRIVE=1
/dev/rmt/5cbn DOWN
2 HP.ULTRIUM5-SCSI.000 hcart3 TLD(1) DRIVE=6
/dev/rmt/2cbn UP
3 HP.ULTRIUM5-SCSI.011 hcart3 TLD(1) DRIVE=4
/dev/rmt/1cbn DOWN
4 HP.ULTRIUM5-SCSI.012 hcart3 TLD(1) DRIVE=2
/dev/rmt/0cbn UP
5 HP.ULTRIUM5-SCSI.013 hcart3 TLD(1) DRIVE=3
/dev/rmt/3cbn UP
Currently defined robotics are:
TLD(1) robotic path = /dev/sg/c0tw500104f000d1600al1
EMM Server = MasterServer
I think the tpconfig command can UP the drive but I was not able to get it to work. When I looked online all I could find was how to add and delete a drive with this command. I was hoping to not delete the drive.
We are using NetBackup 7.5.0.7 on Solaris 10.