Hi,
NB5230 + 1 disk shelf, v2.5.3 aka v7.5.0.2, master/media, adv. disk and MSDP - no other attached storage.
The master/media appliance that I want to re-IP does not perform any client backups, has no other media servers, and is purely an AIR target (i.e. its only function is to pull/import from another master appliance of same spec and version).
Appliance currently has only two IP addresses - one for IPMI and one for bonded eth0/1/2/3 - i.e. eth0 has not been kept as a third management IP address.
The name is not changing - neither the short name, nor is the FQHN.
I'm comfortable with the process and commands for changing the IPMI and bonded eth0/1/2/3 addresses - so I'm not after the CLIsh commands, or a detailed breakdown on the process.
So, assuming LAN infrastructure has been configured correctly - then, apart from checking/updating hosts file entries, and/or getting DNS updated, and flushing (bpclntcmd -clear_host_cache) on anything that might attempt to reach this master/media - can anyone suggest other issues that I might run in to ?
There is also an OpsCenter server that knows about both master servers - so additional comments around are this also welcome.
Thanks,
Dave.